Comtech-ef-data CiLink Bedienungsanleitung PDF herunterladen (Seite 21)

CSAT-5060/XSAT-7080 Transceiver iPAQ Link Revision 2

Setup MN/CiLink.IOM

2–5

Figure 2-7 on the preceding page illustrates the sequence of actions for establishing a CiLink

operating session (note that, throughout this manual, the term ‘tap’ or ‘select’ refers to using the

HP iPAQ stylus to navigate through the differing program screens and parameter selections).

Once all cable connections are complete, turn on the HP iPAQ. Depending on the battery’s charge

status, the device will either run through a cold boot or activate at the default iPAQ Entertainment

(Home) page.

Figure 2-7(a) From the iPAQ Entertainment page: Using the navigation stylus, tap ,

then

File Explorer from the active menu [Figure 2-7(b)]. If it is not already an available selection

from the

Start menu, File Explorer may be activated by selecting Programs from the Start

menu, then tapping the File Explorer icon as shown in Figure 2-7(c).

Figure 2-7(d) From

File Explorer, select My Documents.

Figure 2-7(e) Select the

Business folder. This folder contains the CiLink program.

Figure 2-7(f) Tap the

CiLink file to open the program.

As shown in Figure 2-8, upon activation the primary functionality of CiLink is disabled until a

communications link is established with the transceiver.

In this and all subsequent CiLink

program screens, the presence of ▼ or in a parameter box

denotes availability of a dropdown box containing multiple parameter selections for that item.

2.4.1 Default Communications Settings

COM Port

establishes routing of communications between the

HP iPAQ and the transceiver signal source. These selectable

communications values are automatically populated by the

handheld device’s operating system.

[For the HP iPAQ,

COM1 is assigned to the charger / comm. port,

COM2 is generally reserved for the serial IrDA connection, and

COM3 is assigned to the WiFi connection.]

Baud

sets the data transmission speed between the HP iPAQ

and the transceiver data source. Selectable rates are 1200, 2400,

4800, 9600, and 19200 Baud.

Figure 2-8. CiLink Main Menu

IMPORTANT

COM1 and 9600 Baud are the default communications settings between the HP

iPAQ and the transceiver.

From this page, tapping the icon at the top right-hand corner of the screen causes the user to

exit the CiLink

program and return to Windows.

Subsequent sections of this manual describe all CiLink program operations in detail, beginning

with establishing an operational interface between the handheld device and the transceiver.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Comtech-ef-data CiLink Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Comtech-ef-data CiLink