Comtech EF Data KPA-040 Spezifikationen Seite 118
- Seite / 128
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
KPA Ku-Band Indoor Solid-State Power Amplifier Revision 1
Appendix C MN/KPA.IOM
C–22
C.7.4 Old Status Commands
Configuration Status Configuration Status:
Confirmation:
<DEV/RCS_'cr'
>DEV/RCS_'cr'
ATT_yy.yy'cr'
AMP_nnn'cr'
TX_nnn'cr'
ONL_nnn'cr'
RED_xx_y'cr'
AFR_nnn'cr'
Where:
Attenuator
Amplifier – On/Off
Transmit – On/Off
Online – On/Off
See Note.
Auto Flt Recovery – On/Off
Notes:
1. If Redundancy is Off, xx_y = Off, else if Redundancy is On
the xx field indicates the KPA designation, either BU
(Backup) 01 or 02.
2. If xx is 01 or 02 then the y field indicates the Auto/Manual
status, either 'A' if Auto or 'M' if manual.
3. If xx field is BU, the y field indicates the priority KPA, either 1
if KPA #1 is high priority or 2 if KPA #2 is high priority.
4. For 1:1 systems priority is always #1.
Maintenance Status Maintenance Status:
Confirmation:
<DEV/RMS_'cr'
>DEV/RMS_'cr''lf']
V+28_xx.x'cr'
V+12xx.x'cr'
V-12_xx.x'cr'
V+5_x.x'cr'
V–5_x.x'cr'
V+9_1_xx.x'cr'
V+9_2_xx.x'cr'
TEMP_xx'cr'
FPWR_xx.x'cr'
RPWR_xx.x'cr''lf']
Where:
+28 VDC Supply
+12 VDC Supply
–12 VDC Supply
+5 VDC Supply
–5 VDC Supply
9 VDC Supply #1
9 VDC Supply #2
Temperature
RF Forward Power (dBm)
RF Reflected Power (dBm)
FET Status
KPA-020IN
FET Status:
Confirmation:
<DEV/RFS_'cr'
>DEV/RFS_'cr'
FET1_xxx'cr'
FET2_xxx'cr'
FET3_xxx'cr'
FET4_xxx'cr'
FET5_xxx'cr'
FET6_xxx'cr'
FET7_xxx'cr'
FET8_xxx'cr'
FET9_xxx'cr''lf']
Where:
FET1 current in mA
FET2 current in mA
FET3 current in amps
FET4 current in amps
FET5 current in amps
FET6 current in amps
FET7 current in amps
FET8 current in amps
FET9 current in amps
- Errata A 3
- Part Number MN/KPA.IOM 5
- Revision 1 5
- October 29, 2010 5
- Table of Contents 7
- Figures 11
- PREFACE 13
- Conventions and References 14
- Metric Conversion 14
- Trademarks 14
- Cautions and Warnings 14
- IMPORTANT 15
- Warranty Policy 16
- Limitations of Warranty 16
- Exclusive Remedies 17
- Customer Support 18
- Online Customer Support 18
- Chapter 1. INTRODUCTION 19
- 1.2 Functional Description 20
- Introduction MN/KPA.IOM 21
- 1.3 KPA Specifications 23
- 1.3.5 Dimensional Envelopes 27
- Chapter 2. INSTALLATION 29
- 2.2 Rack Mounting the KPA 30
- Installation MN/KPA.IOM 31
- Chapter 3. CONNECTORS AND 33
- PINOUTS 33
- 3.2 RF Connections 35
- 3.2.2 J2 RF OUT Connector 35
- 3.3 Utility Connections 36
- 3.3.7 J6 COM 1 Connector 39
- Chapter 4. FLASH UPGRADING 41
- Flash Upgrading MN/KPA.IOM 42
- Chapter 5. FRONT PANEL 45
- OPERATION 45
- 5.1.1 Startup Checklist 46
- 5.1.2 LED Indicators 46
- 5.1.3 Keypad 47
- 5.1.4 Front Panel Display 48
- 5.2 Opening Screen 48
- 5.3 SELECT: (Main) Menu 49
- ◄ ► arrows keys, then press 50
- 5.3.1.2 CONFIG: Amp 54
- 5.3.2 SELECT: Monitor 57
- 5.3.2.1 MONITOR: Faults 58
- 5.3.2.2 MONITOR: Stored 58
- 5.3.3.1 UTILITY: Date/Time 60
- 5.3.3.3 UTILITY: PowerMon 60
- 5.3.3.4 UTILITY: Firmware 61
- 5.3.3.5 UTILITY: RefOsc 61
- 5.3.4 SELECT: Front Panel 62
- Chapter 6. KPA ETHERNET 63
- MANAGEMENT 63
- 6.4 Telnet Interface 65
- 6.5.3 Web Server Menu Tree 67
- 6.5.4.1 Home pages 68
- 6.5.4.2 Admin pages 70
- 6.5.4.2.2 Admin 72
- Amplifier 73
- Alarm Mask 74
- [Change Offsets] as 75
- Redundancy Mode 77
- 6.5.4.4 Status pages 78
- Appendix A. MAINTENANCE AND 81
- TROUBLESHOOTING 81
- A.2 Maintenance Testing 82
- A.2.1 Test Point Samples 82
- A.3 Troubleshooting 82
- A.3.1 Troubleshooting Guide 83
- Appendix A MN/KPA.IOM 84
- Appendix B. KPA REDUNDANT 87
- OPERATIONS 87
- Waveguide 88
- Appendix B MN/KPA.IOM 89
- 0.00 dBm 95
- -1.75 dB 95
- +1.75 dB 96
- Appendix C. REMOTE CONTROL 97
- C.3 EIA-232 98
- C.4 Basic Protocol 98
- C.5 Packet Structure 99
- C.5.1 Start of Packet 99
- C.5.2 Target Address 100
- C.5.3 Address Delimiter 100
- C.5.4 Instruction Code 100
- C.5.7 End of Packet 102
- Appendix C MN/KPA.IOM 103
- C–7 103
- C–8 104
- C–9 105
- C–10 106
- C–11 107
- C–12 108
- C–13 109
- C–14 110
- C–15 111
- C–16 112
- C–17 113
- C.7.1 Old Utility Commands 114
- C–19 115
- C–20 116
- C–21 117
- C.7.4 Old Status Commands 118
- C–23 119
- C–24 120
- C–25 121
- C–26 122
- C–27 123
- C.7.5 Old Stored Alarms 124
- C.7.6 Error Processing 125
- C.7.7 Configuration Errors 125
- C.7.8 Time-Outs 125
- C–30 126
- METRIC CONVERSIONS 127
- Units of Length 127
- Temperature Conversions 127
- Units of Weight 127
- 480 • 333 • 2200 PHONE 128
- • 333 • 2161 FAX 128
Verwandte Produkte und Handbücher für Audioverstärker Comtech EF Data KPA-040
Audioverstärker Comtech EF Data LPOD Spezifikationen
(218 Seiten)
(218 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.256 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern